Mechanical Components » Motors and Gearboxes » Tamiya Motors and Gearboxes »
Tamiya 70093 3-Speed Crank-Axle Gearbox Kit
 
|
||||||||||||||||
|
||||||||||||||||
Tamiya’s 3-speed crank-axle gearbox looks very much like half of the twin-motor gearbox (with an added gear ratio option). This compact gearbox can be built in one of three gear ratios (17:1, 58:1, and 204:1), and is Tamiya’s cheapest, general-purpose gearbox.
Compare all products in Tamiya Motors and Gearboxes or 3mm Shaft Gearmotors or Tamiya Gearboxes with 3mm Hexagonal Shafts.
| Description | Specifications (7) | Pictures (6) | Resources (3) | FAQs (6) |
|---|
General specifications
| Typical operating voltage: | 3 V |
|---|---|
| Gear ratio options: | 17:1, 58:1, and 204:1 |
| Free-run motor shaft speed @ 3V: | 12300 rpm1 |
| Free-run current @ 3V: | 150 mA2 |
| Stall current @ 3V: | 2100 mA |
| Motor shaft stall torque @ 3V: | 0.5 oz·in3 |
| Color: | gray |
Notes:
- 1
- A theoretical speed of the gearbox output shaft can be computed by dividing this speed by the gear ratio.
- 2
- This is the no-load current of the motor when disconnected from the gears in the gearbox; the no-load current of the entire gearbox with the motor connected will be slightly higher and will vary depending on the gear ratio.
- 3
- A theoretical torque of the gearbox output shaft can be computed by multiplying this torque by the gear ratio.
Home | Forum | Resources | Wish Lists | Distributors | Ordering Information | BIG Order Form | About | Contact
© 2001–2012 Pololu Corporation
