This expansion plate for the RP5 tracked chassis is made of 1/8" (3mm) acrylic. The numerous 3 mm wide slots give you the flexibility to mount components in a variety of orientations almost anywhere on the plate.
Compare all products in Pololu RP5 Expansion Plates.
  |
| Two RP5 expansion plates with an Orangutan SV-328 and an Arduino Duemilanove. |
|---|
 |
| Pololu RP5 wide expansion plate with a TReX Jr. and an RC receiver. |
|---|
 |
| A narrow RP5 expansion plate with an Orangutan SV-328 and a Sharp digital distance sensor. |
|---|
Overview
This 1/8" acrylic expansion plate lets you mount a variety of components to your RP5 tracked chassis. The 3 mm wide slots covering the plate support many configurations of sensors and other robot components. The slot size and spacing is compatible with the many Tamiya mechanical sets that have 3 mm holes spaced 5 mm apart. Included with the plate are four tapping screws for mounting the plate to the RP5 tracked chassis.
The Pololu RP5 expansion plate comes in both narrow and wide versions. The narrow plate (RRC07A) is 6.8" x 3.1" (17.2 x 8.0 cm) and covers the main plastic housing of the RP5 chassis. The wide plate (RRC07B) is 6.8" x 5.0" (17.2 x 12.7 cm) and covers both the main plastic housing and the tracks.
Both the narrow and wide expansion plates are available in a variety of colored (and clear) acrylics:
People often buy this product together with:
