This 12-inch (30-cm) cable has three 26 AWG wires with a 3-pin female JST PH-style connector that matches the connector on Sharp analog distance sensors that have 3 pins. The other ends of the wires are unterminated; they can be cut to length to match your application. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.
Compare all products in Cables and Wire.
This 12-inch (30-cm) cable has three 26 AWG wires with a 3-pin female JST PH-style connector that matches the connector on Sharp analog distance sensors that have 3 pins, such as the 4-30cm GP2D120, the 10-80cm GP2Y0A21, and the 20-150cm GP2Y0A02. The other ends of the wires are unterminated; they can be cut to length to match your application. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal. The connector pins have a 2mm pitch.
You can use our male or female crimp pins and a 0.1" 3×1 crimp connector housing to make a connector for the unterminated end of the cable that is compatible with standard solderless breadboards and perfboards and the 0.1" pin spacing that is commonly found on microcontroller boards such as Arduinos and Orangutan robot controllers.
People often buy this product together with:
