Wires with Pre-Crimped Terminals

Alternatives available with variations in these parameter(s): gender length color Select variant…

These premium stranded copper wires are great for making quick and easy prototyping connections. Each end is pre-crimped with a male or female crimp pin, and they can be combined with our crimp connector housings to create custom cables with 0.1″ (2.54 mm) connectors. Just pick colors and genders for your wires and snap them into the housings of your choice (note: getting the wires out is possible but not as easy). No soldering is required!

These cables give you the flexibility to make harnesses or assemblies that branch from one connector on one side to multiple connectors on the other (the left picture below shows an example of this). You can also cut off one pre-crimped end and solder the wires directly to components to make swapping connections easy, as shown in the right picture below.

Example of a custom cable made with wires with pre-crimped terminals and crimp connector housings.

Micro Metal Geamotor with a custom cable made from wires with pre-crimped terminals.

A variety of lengths and colors are available:

length single-color packs multi-color option gauge (AWG)
1″ (2.5 cm) 10-pack, 6 colors available 60-pack (10 each of 6 colors) 26
2″ (5 cm) 10-pack, 6 colors available 60-pack (10 each of 6 colors) 26
3″ (7.5 cm) 10-pack, 6 colors available 10-wire, 10-color ribbon cable 26
6″ (15 cm) 10-pack, 10 colors available 10-wire, 10-color ribbon cable 26
12″ (30 cm) 10-pack, 10 colors available 10-wire, 10-color ribbon cable 26
24″ (60 cm) 5-pack, 10 colors available 10-wire, 10-color ribbon cable 26
36″ (90 cm) 5-pack, 6 colors available 10-wire, 10-color ribbon cable 22
60″ (150 cm) 2-pack, 6 colors available 10-wire, 10-color ribbon cable 22

Pololu Ribbon Cables with Pre-Crimped Terminals are available in a variety of lengths (3″, 6″, 12″, and 24″ shown; 36″ and 60″ not pictured).

Ribbon Cable with Pre-Crimped Terminals is easy to peel apart (6″ M-F version shown).

These wires are available with male crimp pins on both ends, female crimp pins on both ends, or one male and one female crimp pin. These crimped terminals are designed for use with 0.1″ (2.54 mm) male headers and female headers, solderless breadboards, and prototyping PCBs. Close-up pictures of the male and female crimp pins are shown below:

Ribbon Cable with Pre-Crimped Terminals male end.

Ribbon Cable with Pre-Crimped Terminals female end.

Note: The male crimp pins and female crimp pins are also available by themselves for those who want to crimp their own wires with different lengths or gauges.

You can use the following selection boxes to get to the specific wires you are looking for:

Alternatives available with variations in these parameter(s): gender length color Select variant…

For versions of these wires with 1×1 housings already installed, see our Premium Jumper Wires.

Subcategories

Premium 26 AWG stranded jumper wires made from ribbon cable in a variety of lengths. They work with crimp connector housings to make custom cables that work with 0.1″ (2.54 mm) headers and breadboards.

Wires with female crimp pins on both ends. They are available in a variety of lengths and colors and can be combined with crimp connector housings to make custom cables that work with 0.1″ (2.54 mm) headers and breadboards.

Wires with a male crimp pin on one end and a female crimp pin on the other end. They are available in a variety of lengths and colors and can be combined with crimp connector housings to make custom cables that work with 0.1″ (2.54 mm) headers and breadboards.

Wires with male crimp pins on both ends. They are available in a variety of lengths and colors and can be combined with crimp connector housings to make custom cables that work with 0.1″ (2.54 mm) headers and breadboards.


Related Products

Female Crimp Pins for 0.1" Housings 100-Pack
Male Crimp Pins for 0.1" Housings 100-Pack
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Right Angle
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Double-Sided
3-Pin Female JST PH-Style Cable (30 cm) with Female Pins for 0.1" Housings
3-Pin Female JST PH-Style Cable (30 cm) with Male Pins for 0.1" Housings
Crimping Tool: 0.1-1.0 mm² Capacity, 16-28 AWG
Crimping Tool: 0.08-0.5 mm² Capacity, 20-28 AWG

Related Categories

Cables and Wire
Connectors
Electronics Prototyping
Crimp Connector Housings
Premium Jumper Wires
Solderless Breadboards
0.1″ (2.54 mm) Female Headers
0.1″ (2.54 mm) Male Headers
Prototyping PCBs
Jumper Wire Kits
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors