Tools

Compare all products in this category

Pololu item #: 156
Price: $16.95
Quantity:

25W Soldering Iron with Deluxe Stand

This high-quality 25-Watt soldering iron has a rubber sleeve handle and a screw-in replaceable tip that’s plated for long life. The accompanying heavy-duty metal stand comes with a sponge for cleaning the iron’s tip while you work.

Pololu item #: 155
Price: $12.95
Quantity:

25W Soldering Iron with Small Stand

This high-quality 25-Watt soldering iron has a rubber sleeve handle and a screw-in replaceable tip that’s plated for long life. The accompanying stand has a plastic base with a flip-up wire.

Pololu item #: 2260
Price: $49.95
Quantity:

iMAX-B6AC Balance Charger and Discharger

The iMAX-B6AC can charge and discharge NiMH, NiCd, Pb, LiPo, Li-ion, and LiFe batteries with individual cell balancing for up to 6 lithium cells. It features a built-in adapter that can be powered from 100–240 VAC, or it can alternatively be powered via a 11–18 VDC input. With its versatile charging capabilities and advanced features like input power monitoring, delta-peak sensitivity, cyclic charging and discharging, and more, the iMAX-B6AC is a great addition to the workbench of any RC, DIY, or robot enthusiast.

Pololu item #: 2176
Price: $34.95
Quantity:

Battery Balancer & Watt Meter

This device serves as an inline watt meter that measures the current, voltage, and total output of a power source. It can also check and balance the cell voltage of lithium-based battery packs with up to six cells.

Pololu item #: 1628
Price: $3.95
Quantity:

Tweezers - Straight (ESD-Safe)

This fine-tip, high-precision tweezer works with components as small as 0.01 mm and is good for holding wires and surface-mount parts in place while soldering them. It is ESD-safe and made of anti-magnetic, anti-acid, and non-corrosive stainless steel. This tweezer is straight; we also sell curved tweezers.

Pololu item #: 1629
Price: $3.95
Temporarily out of stock. See product page to backorder.

Tweezers - Curved (ESD-Safe)

This fine-tip, high-precision tweezer works with components as small as 0.01 mm and is good for holding wires and surface-mount parts in place while soldering them. It is ESD-safe and made of anti-magnetic, anti-acid, and non-corrosive stainless steel. This tweezer is curved; we also sell straight tweezers.

Pololu item #: 1928
Price: $34.95
Quantity:

Crimping Tool: 0.1-1.0 mm² Capacity, 16-28 AWG

This crimping tool can be used to crimp both male and female versions of our Tamiya connector crimp pins, mini Tamiya connector crimp pins, JST connector crimp pins, JR crimp pins, Futaba J crimp pins, and crimp pins for 0.1" housings onto 16-28 AWG wires to make custom cables. The tool offers ratcheting action for increased consistency and ease of use.

Pololu item #: 1929
Price: $29.95
Quantity:

Crimping Tool: 0.08-0.5 mm² Capacity, 20-28 AWG

This crimping tool can be used to crimp both male and female versions of our JST connector crimp pins, JR crimp pins, Futaba J crimp pins, and crimp pins for 0.1" housings onto 20-28 AWG wires to make custom cables. The tool offers ratcheting action for increased consistency and ease of use.

Pololu item #: 1064
Price: $0.45
Quantity:

Hex (Allen) Wrench 0.05"

This 0.05" diameter, 1.75" long by 0.6" wide flat-ended hex key works with small hex screws, such as the set screws included with our mounting hubs.

Pololu item #: 157
Price: $1.50
Quantity:

ST-5 Slotted Screwdriver 3/16 x 3 in.

This 3/16″ × 3″ slotted screwdriver has a chrome vanadium shaft and measures 6" from its tip to the end of its plastic handle.

Pololu item #: 158
Price: $1.50
Quantity:

ST-6 Phillips Screwdriver #1 x 3 in.

This #1 × 3″ slotted screwdriver has a chrome vanadium shaft and measures 6" from its tip to the end of its plastic handle.

Pololu item #: 161
Price: $6.95
Quantity:

ST-30 Wire Stripper 6-in. AWG 16-26

This all-purpose wire stripper cleanly strips the tips of 16-26 AWG wires, has built-in extras including wire cutters, steel wire cutters, and a crimping tool, and its tip functions as pliers.

Pololu item #: 150
Price: $3.99
Quantity:

ST-2 Mini Long-Nose Pliers

These mini long-nose pliers are great for getting a grip on small components. They are made of forged steel, have a return spring and cushion grip, and are 5" long

Pololu item #: 159
Price: $3.99
Quantity:

ST-1 Mini Diagonal Cutter

These diagonal cutters come in handy whether you’re cutting wires or trimming plastic parts off of parts trees. They are made of forged steel, have a return spring and cushion grip, and are 4.5" long.

New Products

Zumo Robot for Arduino (Assembled with 75:1 HP Motors)
Free Elektor magazine April 2013
Arduino Micro
Stepper Motor: Bipolar, 200 Steps/Rev, 56×76mm, 3.2V, 2.8 A/Phase
QTR-L-1A Reflectance Sensor (2-Pack)
Tamiya 72007 4-Speed High-Power Gearbox Kit
Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 42×11.6mm, 3.5V, 1 A/Phase
Tamiya 70162 Remote Control Construction Set (tire type)
Free Elektor magazine May 2013
Mini Slide Switch: 3-Pin, SPDT, 0.3A (3-Pack)

Feedback

Comments or questions? (opens in new window)

Services

Products

New Products

Specials!

Robot Kits

Electronics

Mechanical Components

Tools

Shirts

Combination Deals

Discontinued Items

Community