|
|
Pre-cut wires that make your prototype breadboard circuits quick to assemble, neat, and reliable.
|
|
|
|
|
This is a great 6-inch (150-mm) board-to-board cable for devices that have 0.1" 3-pin male header connectors, such as RC servo controllers, RC receivers and our TReX motor controllers. It can also be a convenient way to connect various sensors to a robot controller.
|
|
|
|
|
|
|
This is a great 12-inch (300-mm) board-to-board cable for devices that have 0.1" 3-pin male header connectors, such as RC servo controllers, RC receivers and our TReX motor controllers. It can also be a convenient way to connect various sensors to a robot controller.
|
|
|
|
|
|
|
This is a great 24-inch (600-mm) board-to-board cable for devices that have 0.1" 3-pin male header connectors, such as RC servo controllers, RC receivers and our TReX motor controllers. It can also be a convenient way to connect various sensors to a robot controller.
|
|
|
|
|
|
|
You can use these 12-inch (300-mm) cables to easily extend the leads of your RC hobby servos.
|
|
|
|
|
|
|
You can use these 24-inch (600-mm) cables to easily extend the leads of your RC hobby servos.
|
|
|
|
|
|
|
This 12" Y-cable can be used to connect two servos to a single servo control line.
|
|
|
|
|
|
|
This USB cable is six feet long, has a male, type-A connector on one end, and a male, mini-B connector on the other.
|
|
|
|
|
|
|
This six-foot straight-through DB9 extension cable has a male connector on one end and a female connector on the other.
|
|
|
|
|