Our 12 V linear actuators have dynamic load ratings ranging from 22 to 110 pounds and can be used in a variety of heavy-duty applications. Limit switches at each end make the actuators easy to control over their full ranges of motion, and an optional feedback potentiometer enables closed-loop position control.
They are available in a range of stroke lengths and speeds:
Stroke
length |
Speed
@ 12V |
Actuator
without feedback |
Actuator
with feedback |
| 2″ |
0.5″/s |
Concentric LACT2-12V-20 |
$89.95 |
Concentric LACT2P-12V-20 |
$109.95 |
| 4″ |
0.5″/s |
Concentric LACT4-12V-20 |
$89.95 |
Concentric LACT4P-12V-20 |
$109.95 |
| 0.6″/s |
Generic #2332: 4″, 0.6″/s |
$66.95 |
Generic #2333: 4″, 0.6″/s |
$86.95 |
| 1.5″/s |
Generic #2344: 4″, 1.5″/s |
$66.95 |
Generic #2345: 4″, 1.5″/s |
$86.95 |
| 1.7″/s |
Concentric LACT4-12V-5 |
$89.95 |
Concentric LACT4P-12V-5 |
$109.95 |
| 6″ |
0.5″/s |
Concentric LACT6-12V-20 |
$89.95 |
Concentric LACT6P-12V-20 |
$109.95 |
| 8″ |
0.5″/s |
Concentric LACT8-12V-20 |
$89.95 |
Concentric LACT8P-12V-20 |
$109.95 |
| 0.6″/s |
Generic #2336: 8″, 0.6″/s |
$70.95 |
Generic #2337: 8″, 0.6″/s |
$90.95 |
| 1.5″/s |
Generic #2348: 8″, 1.5″/s |
$70.95 |
Generic #2349: 8″, 1.5″/s |
$90.95 |
| 10″ |
0.5″/s |
Concentric LACT10-12V-20 |
$89.95 |
Concentric LACT10P-12V-20 |
$109.95 |
| 12″ |
0.5″/s |
Concentric LACT12-12V-20 |
$89.95 |
Concentric LACT12P-12V-20 |
$109.95 |
| 0.6″/s |
Generic #2340: 12″, 0.6″/s |
$74.95 |
Generic #2341: 12″, 0.6″/s |
$94.95 |
| 1.5″/s |
Generic #2352: 12″, 1.5″/s |
$74.95 |
Generic #2353: 12″, 1.5″/s |
$94.95 |
| 1.7″/s |
Concentric LACT12-12V-5 |
$89.95 |
Concentric LACT12P-12V-5 |
$109.95 |
For a more detailed, sortable table, use the comparison link below.
Compare all products in this category
|
|
These linear actuators are lower-cost alternatives to the LD series linear actuators by Concentric. They are available in stroke lengths from 4″ to 12″ and two different combinations of linear force and speed (110 lbs at 0.6″/s or 22 lbs at 1.5″/s).
|
|
|
These linear actuators by Concentric International can be used in a variety of heavy-duty applications. They are available in stroke lengths from 2″ to 12″ and gear ratios of 5:1 (for speeds up to 1.7 in/s) or 20:1 (for dynamic forces up to 110 lbs).
|
