USB Mini-B Connector Breakout Board

This is a merged information page for Item #2593.
View normal product page.

Pololu item #: 2593
Brand: Pololu
Status: Active and Preferred 
RoHS 3 compliant


This simple board breaks out all five pins of a USB Mini-B connector to a 0.1″ pin spacing that is compatible with standard perfboards, solderless breadboards, and 0.1″ connectors.

Compare all products in Computer Interface or Electronics Prototyping.

Pictures

USB Mini-B connector breakout board with included optional header pins.

Close-up of Mini-B connector on the USB Mini-B connector breakout board.

USB Mini-B connector breakout board, top view.

USB Mini-B connector breakout board, bottom view with dimensions.




USB Mini-B connector breakout board, bottom view with dimensions.

This board breaks out the VBUS, GND, D-, D+ and ID pins of a USB Mini-B connector. The VBUS and GND pins can be used to power your project from USB, while the D- and D+ pins give you access to the USB differential data signals. Each of these pins, along with the ID pin, are broken out into a 1×5 row of 0.1″-spaced pins on the board. The included 1×5 straight male header can be soldered to these pins to allow the board to be used with perfboards, solderless breadboards, and 0.1″ connectors.

This tiny unit measures only 0.52″ × 0.85″ (0.55″ × 0.85″ including its USB Mini-B connector) and has four 0.086″ diameter mounting holes for #2 or M2 screws.

Close-up of Mini-B connector on the USB Mini-B connector breakout board.

USB Mini-B connector breakout board, top view.

We also carry a USB Micro-B connector breakout board and two different versions of USB 2.0 Type-C connector breakout boards (usb07a and usb07b).

Additionally, we have two power muxes that double as USB Micro-B breakout boards: the FPF1320 carrier and the TPS2113A carrier. These latter two power multiplexers make it easy to have a device that can be powered from both USB and an external supply.

Dimensions

Size: 0.55″ × 0.85″ × 0.23″1
Weight: 1.5 g2

Identifying markings

PCB dev codes: usb04a
Other PCB markings: 0J7721

Notes:

1
Without included optional headers. This measurement includes the USB Micro-B connector, which extends 0.05″ past the edge of the PCB.
2
Without included optional headers.

File downloads

Frequently-asked questions

No FAQs available.

On the blog

No blog posts to show.