This is a merged information page for Item #1203.
View normal product page.
Pololu item #:
1203
Brand:
Pololu
Status:
Active and Preferred
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 5 mm diameter motor shafts. The set includes two hubs, two #4-40 set screws for securing the hubs to motor shafts, and one 0.05″ Allen wrench for use with the set screws. Each hub has four threaded mounting holes for #4-40 screws (not included).
We have an assortment of universal mounting hubs available, spanning several shaft sizes and featuring mounting holes threaded for metric or imperial screws:
Alternatives available with variations in these parameter(s): shaft diameter mounting hole size Select variant…
Compare all products in Pololu Universal Mounting Hubs.
These universal mounting hubs are designed to work with most 5 mm diameter shafts, including round shafts and “D” shafts, such as those on our stepper motors. Each of the two included hubs has four mounting holes for #4-40 screws (not included), letting you mount custom wheels or mechanisms to your motors. The two included #4-40 hex set screws (one for each hub) allow secure coupling of shaft to hub, and a 0.05″ hex wrench (often the smallest size in SAE Allen wrench sets) is included for use with the set screws. A dimension diagram of the hub is available under the resources tab.
We have an assortment of hubs available for various shaft sizes and with different mounting hole thread options. Each Universal Mounting Hub is compatible with a variety of our wheels as detailed in the following table:
Pololu Universal Mounting Hubs | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
for 3mm shafts | for 4mm shafts | for 5mm shafts | for 6mm shafts | for 1/4″ shafts | for 8mm shafts | ||||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
||||||||
M3 holes #4-40 holes #2-56 holes |
M3 holes #4-40 holes |
M3 holes #4-40 holes |
M3 holes #4-40 holes |
M3 holes #4-40 holes |
M3 holes |
||||||||
![]() Pololu Wheels for 3mm Shafts |
32×7mm | – | – | – | – | – | – | ||||||
40×7mm | – | – | – | – | – | – | |||||||
60×8mm | – | – | – | ||||||||||
70×8mm | – | – | – | ||||||||||
80×10mm | |||||||||||||
90×10mm | |||||||||||||
![]() Pololu Wheels for Servos |
40×7mm | – | – | – | – | – | – | ||||||
60×8mm | |||||||||||||
70×10mm | – | – | – | ||||||||||
90×10mm | – | – | – | ||||||||||
![]() Pololu Multi-Hub Wheels |
80×10mm | – | – | – |
|
|
Size: | 19 mm diameter × 5 mm thick |
---|---|
Weight: | 3.2 g1 |
Shaft diameter: | 5 mm |
Mounting hole size: | #4-40 |
Printable mechanical drawing for the Pololu universal aluminum mounting hub for 5mm shaft, #4-40 holes.
No FAQs available.
Pablo Lewin wanted a way to adjust the antenna for his Ham radio remotely, but was told his antenna controller was too old to upgrade for remote...