This is a merged information page for Item #1798.
View normal product page.
Pololu item #:
1798
Brand:
PCX
This 30 cm (12″) cable has 26 AWG wires and a 3-pin female JST PH-style connector that works with Sharp analog distance sensors that have mating PH connectors. The other ends of the wire are terminated with female pins for 0.1" housing.
Note: The wire color order of this cable matches the Sharp distance sensor pinout (red on pin 1 for power, black on pin 2 for ground, and white on pin 3 for signal); this differs from the color order convention followed by most of our other JST PH cables.
Alternatives available with variations in these parameter(s): gender Select variant…
Compare all products in 3-Pin JST PH-Style Cables.
![]() |
3-Pin Female JST PH-Style Cable for Sharp Distance Sensors (30cm). |
---|
![]() |
3-pin JST PH-style cable connected to a Sharp analog distance sensor. |
---|
![]() |
Female crimp pin for 0.1" housings crimped onto a wire. |
---|
This 30 cm (12″) cable has 26 AWG wires and a 3-pin female JST PH-style connector (2 mm pitch) that works with Sharp analog distance sensors that have mating PH connectors, such as the 4-30 cm GP2Y0A41, the 10-80 cm GP2Y0A21, and the 20-150 cm GP2Y0A02.
Note: This cable is not compatible with the 2-15 cm Sharp GP2Y0A51, which has a JST ZH connector. For a cable that works with that sensor, consider the 3-Pin Female JST ZH-Style Cable.
The other ends of the wires are terminated with female crimp pins that are compatible with our 0.1" crimp connector housings. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.
|
|
|
You can use our 0.1″ 3×1 crimp connector housing to make a connector that is compatible with the standard 0.1" male headers included with many electronics boards.
We carry a version of this cable with pre-crimped male pins (for use with solderless breadboards, perfboards, and 0.1" female headers). We also carry a version with unterminated ends for use with custom connectors.
Pins: | 1×3 |
---|---|
Pitch: | 2 mm |
Length: | 30 cm |
Gender: | Female-Female |
---|---|
Wire gauge: | 26 AWG |
Current rating: | 2 A |
Voltage rating: | 100 V |
Connector: | JST PH-type |
No FAQs available.
No blog posts to show.