AIRbot

Posted by Ben on 21 May 2010

AIRbot is a robot that can be controlled by a cellphone and can send images back to the cellphone. It uses a yellow RP5 tracked chassis, a transparent clear RP5 expansion plate, and a qik 2s9v1 dual serial motor controller along with the AIRcable S.D.K. and the AIRcable OptiEyes. The source code (both AIRcable and Nokia) and circuit diagrams are freely available.

Featured link: http://wiki.opensensors.org/airbot

0 comments

Post a comment

Using your Pololu account allows you to customize your avatar and manage your comments; you can also post anonymously.

New Products

ACS37220LEZATR-150B5 Current Sensor Large Carrier -150A to +150A, 5V
9V, 500mA Step-Down Voltage Regulator D45V5F9
Pololu Digital Distance Sensor with Pulse Width Output, 300cm Max, Side-Entry Connector
CT433-HSWF65DR TMR Current Sensor Large Carrier 0A to 65A, 3.3V
Pololu I²C Isolator with Isolated Power, ISO1640, MIE1W0505BGLVH, 5V/3.3V, 200mA
3.3V, 100mA Step-Down Voltage Regulator D45V1E2F3
CT432-HSWF20DR TMR Current Sensor Compact Carrier 0A to 20A, 5V
Pololu Isolated USB-to-I²C Adapter
ACS72981KLRATR-150U3 Current Sensor Compact Carrier 0A to 150A, 3.3V
ACS72981KLRATR-150U5 Current Sensor Large Carrier 0A to 150A, 5V
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors