ACS714 Current Sensor Carrier -5A to +5A

Pololu item #: 1185
Brand: Pololu
Status: Discontinued 
RoHS 3 compliant

This product has been discontinued.

Please consider the newer ACS724 current sensor carrier -5A to +5A as an alternative. It has the same physical dimensions and pinout while offering greater sensitivity and improved accuracy.

This board is a simple carrier of Allegro’s ±5A ACS714 Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.1 kV RMS. This version accepts a bidirectional current input with a magnitude up to 5 A and outputs a proportional analog voltage (185 mV/A) centered at 2.5 V with a typical error of ±1.5%. It operates from 4.5 V to 5.5 V and is intended for use in 5 V systems.

 Description Specs (9) Pictures (3) Resources (4) FAQs (0) On the blog (0) 

ACS714 current sensor carrier -5A to +5A back with dimensions.

Current sensor carrier with solderless ring terminal connectors (not included).

Pololu ACS714/ACS715 current sensor carrier schematic diagram.


Related Products

ACS724LLCTR-05AB Current Sensor Carrier -5A to +5A
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Right Angle
0.100" (2.54 mm) Female Header: 1x3-Pin, Straight
0.1" (2.54mm) Crimp Connector Housing: 1x3-Pin 25-Pack
T Connector Male-Female Pair

Related Categories

Current Sensors
ACS724 Current Sensor Carriers
Terminal Blocks
Premium Jumper Wires
Wires with Pre-Crimped Terminals
0.1″ (2.54 mm) Male Headers
Electronics Prototyping
Motion Control Modules
Motors and Gearboxes
RC Servos
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors