Cables and Wire

Subcategories

Stranded 26 AWG wires with male or female connectors for use with 0.1″ (2.54 mm) headers and breadboards. Available in a variety of lengths and colors.

Premium stranded wires with male or female terminals for use with 0.1″ (2.54 mm) headers and breadboards. Available in a variety of lengths and colors. Works with crimp connector housings to make custom cables.

Housings with 0.1″ (2.54 mm) spacings that easily snap onto wires with pre-crimped terminals to make custom cables.

Bulk stranded hook-up wire in a variety of gauges and colors. The convenient mini spools are all filled, so the wire lengths range from 40 to 100 feet (12 to 30 meters), depending on thickness.

Pre-cut wires that make your prototype breadboard circuits quick to assemble, neat, and reliable.

An assortment of JR- and Futaba-compatible servo extension and splitter cables.

An assortment of single- and double-ended cables with JST SH-style connectors that work with the encoders on Pololu Micro Metal Gearmotors.


Products in category “Cables and Wire”

Pololu item #: 2172
Brand: Generic supply outlook
RoHS 3 compliant
Out of stock.
Quantity:

This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This female Tamiya connector has 10cm 14-AWG leads with stripped and tinned terminations.

Pololu item #: 2173
Brand: Generic supply outlook
RoHS 3 compliant
Out of stock.
Quantity:

This style of high-current connector is commonly used with the 7.2V battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This male Tamiya connector has 10cm 14-AWG leads with stripped and tinned terminations.

Pololu item #: 2178
Brand: Generic supply outlook
RoHS 3 compliant
Out of stock.
Quantity:

This connector, a smaller version of the female Tamiya plug, is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This female mini Tamiya connector has 10 cm 18-AWG leads with stripped and tinned terminations.

Pololu item #: 2179
Brand: Generic supply outlook
RoHS 3 compliant
Out of stock.
Quantity:

This connector, a smaller version of the male Tamiya plug, is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This male mini Tamiya connector has 10 cm 18-AWG leads with stripped and tinned terminations.

Pololu item #: 2180
Brand: Generic
RoHS 3 compliant
Out of stock.
Quantity:

This female JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so that power cannot be reversed.

Pololu item #: 2181
Brand: Generic supply outlook
RoHS 3 compliant
Out of stock.
Quantity:

This male JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so that power cannot be reversed.

Pololu item #: 2411
Brand: Generic supply outlook
RoHS 3 compliant
Out of stock.
Quantity:

This 12-inch (30-cm) cable has 28 AWG wires and a 3-pin female JST ZH-style connector that mates with the 3-pin connector on Sharp GP2Y0A51 analog distance sensors. The other ends of the wires are unterminated; they can be cut to length to match your application. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.

Pololu item #: 117
Brand: Generic supply outlook
RoHS 3 compliant
Out of stock.
Quantity:

This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that works with Sharp analog distance sensors that have mating PH connectors. The other ends of the wires are unterminated; they can be cut to length to match your application. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.

Pololu item #: 1799
Brand: PCX supply outlook
RoHS 3 compliant
Out of stock.
Quantity:

This 12-inch (30-cm) cable has 26 AWG wires with a 3-pin female JST PH-style connector that works with Sharp analog distance sensors that have mating PH connectors. The other ends of the wire are terminated with male pins for 0.1" housing. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.

Pololu item #: 1798
Brand: PCX supply outlook
RoHS 3 compliant
Out of stock.
Quantity:

This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that works with Sharp analog distance sensors that have mating PH connectors. The other ends of the wire are terminated with female pins for 0.1" housing. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.

Pololu item #: 1116
Brand: Generic supply outlook
RoHS 3 compliant
Out of stock.
Quantity:

This 5.5" (14cm) cable has two 26AWG conductors with a 2mm-pitch 2-pin female JST PH-style connector. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.

Pololu item #: 1164
Brand: Generic supply outlook
RoHS 3 compliant
Out of stock.
Quantity:

This 6" (15cm) cable has two 26AWG conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which means this connector will work with 0.1" male header pins and standard perfboards and solderless breadboards. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.

Pololu item #: 972
Brand: Generic
RoHS 3 compliant
Out of stock.
Quantity:

This 12" (30 cm), 6-conductor ribbon cable has a female 2×3 IDC connector on each end that is designed to plug into a 0.100" (2.54 mm) 2×3 shrouded box header. It can also be used with 0.100" male header pins.

Pololu item #: 2072
Brand: Generic supply outlook
Out of stock.
Quantity:

This Micro-USB cable is extremely thin (2mm diameter), light, and flexible, which makes it easier to use than bulkier cables that tend to take up more desk space and pull small devices off tables. The 6 ft (1.8 m) cable is terminated on one end by a Type-A USB plug and on the other by a Micro-B USB plug. Note that this cable is only capable of low- and full-speed USB, not high-speed USB.

Pololu item #: 2073
Brand: Generic supply outlook
Out of stock.
Quantity:

This Micro-USB cable is 6 ft (1.8 m) long and is terminated on one end by a Type-A USB plug and on the other by a Micro-B USB plug. This cable works with high-speed USB devices.

Pololu item #: 1309
Brand: Generic supply outlook
Out of stock.
Quantity:

This Mini-USB cable is extremely thin (2mm diameter), light, and flexible, which makes it easier to use than bulkier cables that tend to take up more desk space and pull small devices off tables. It is five feet long (1.5 m) and has a male Type-A connector and a male Mini-B connector. Note that this cable is not capable of high-speed USB.

Pololu item #: 1315
Brand: Generic supply outlook
Out of stock.
Quantity:

This Mini-USB cable is five feet long (1.5 m) and has a male Type-A connector on one end and a male Mini-B connector on the other. This cable works with high-speed USB devices.

Pololu item #: 2315
Brand: Concentric
RoHS 3 compliant
Out of stock.
Quantity:

This 10 ft (3 m) extension cable is designed to work with Glideforce light-duty and medium-duty linear actuators with feedback. It consists of five 20 AWG wires terminated on one end with male power and feedback connectors that securely snap into the actuator’s female power and feedback connectors. The other end has the same female connectors as the linear actuator’s cable; you can cut off these connectors and solder the five wire leads directly to your project, or you use crimp pins and crimp connector housings to make your own custom connector.

Related Products

Wire Stripper 10-20 AWG Solid (12-22 AWG Stranded)
Wire Stripper 20-30 AWG Solid (22-32 AWG Stranded)
Hakko FX-888D Digital Soldering Station
Hakko FX-901 Cordless Soldering Iron
Female Crimp Pins for 0.1" Housings 100-Pack
Male Crimp Pins for 0.1" Housings 100-Pack
Crimping Tool: 0.1-1.0 mm² Capacity, 16-28 AWG
Crimping Tool: 0.08-0.5 mm² Capacity, 20-28 AWG

Related Categories

Electronics
Connectors
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors