This is a merged information page for Item #3638.
View normal product page.
Pololu item #:
3638
Brand:
Concentric
This adapter was designed specifically for the Glideforce Industrial-Duty (ID) linear actuators and can be used to turn either end into a clevis-style bracket. It is machined out of a single piece of aluminum and has been tested to 1700 kgf [3800 lbs or 17,000 N] of static load, which is well above the highest static loads the ID actuators are rated for. The mounting pin has a 0.498″ (12.6 mm) diameter. This bracket is sold individually, and two brackets are required for each linear actuator.
Compare all products in Motor Brackets or Glideforce Industrial-Duty (ID) Linear Actuators.
|
Mounting Clevis for Glideforce Industrial-Duty Linear Actuators – Aluminum. |
|---|
 |
Mounting Clevis for Glideforce Industrial-Duty Linear Actuators – Aluminum. |
|---|
 |
Mounting clevis on the extension rod of an Industrial-Duty linear actuator. |
|---|
 |
Mounting clevis on the back of an Industrial-Duty linear actuator. |
|---|
This adapter works on either end of the Glideforce industrial-duty (ID) linear actuators.
|
|
A sleeve piece is included (visible set in the hole in the right picture above) to provide a better fit when using this on the back of the linear actuator, as shown below:
|
When using this on the extension rod of the linear actuator, which has a wider diameter, the sleeve should be removed:
|
See the bracket datasheet (332k pdf) for dimensions.
This product is Concentric part number LA-ID-CLEVIS.
| Weight: | 360 g |
|---|
No FAQs available.
No blog posts to show.