New quote

Use this form to request a quote for laser cutting.

You are now creating the first design for your quote. You can add new designs to the quote after creating this design.

Please upload a file and select a single material to use with this design. If you want parts cut from multiple materials, add additional designs after this one.

If you want all your parts cut from the same material, we prefer that you include all of your parts in a single file.
Please enter more than just a number for the quantity. Example: "2 copies of the layout provided", or "3 circles and 5 squares for a total of 8 pieces"
  • If you select a non-stocked material, please specify here whether you want to ship it to us or if you want us to special-order it for you.
  • If you have a promotional code, you can enter it here.
Photos:
Please choose a material below

Material Selection

Please select one of the materials below or specify a special material at the bottom of this page. Learn more about materials for laser cutting.

Select
1.5 mm (~1/16")opaqueblackABSstockedEasily machined with hand tools; "haircell texture" on one side, bends a lot before it cracks, smells bad so you might have to air the parts out
3 mm (~1/8")opaqueblackABSstockedEasily machined with hand tools; "haircell texture" on one side, bends a lot before it cracks, smells bad so you might have to air the parts out
4.5 mm (~3/16")opaqueblackABSstockedEasily machined with hand tools; "haircell texture" on one side, bends a lot before it cracks, smells bad so you might have to air the parts out
6 mm (~1/4")opaqueblackABSstockedEasily machined with hand tools; "haircell texture" on one side, bends a lot before it cracks, smells bad so you might have to air the parts out
1.5 mm (~1/16")transparentclearacrylic/plexi - caststockedCAST acrylic provides high-contrast raster engraving and better machinability than EXTRUDED acrylic, but it has less consistent thickness. Read more about cast vs extruded acrylic.
3 mm (~1/8")opaqueblackacrylic/plexi - caststockedBlack #2025; CAST acrylic provides high-contrast raster engraving and better machinability than EXTRUDED acrylic, but it has less consistent thickness. Read more about cast vs extruded acrylic.
3 mm (~1/8")transparentclearacrylic/plexi - caststockedCAST acrylic provides high-contrast raster engraving and better machinability than EXTRUDED acrylic, but it has less consistent thickness. Read more about cast vs extruded acrylic.
4.5 mm (~3/16")opaqueblackacrylic/plexi - caststockedBlack #2025; CAST acrylic provides high-contrast raster engraving and better machinability than EXTRUDED acrylic, but it has less consistent thickness. Read more about cast vs extruded acrylic.
4.5 mm (~3/16")transparentclearacrylic/plexi - caststockedCAST acrylic provides high-contrast raster engraving and better machinability than EXTRUDED acrylic, but it has less consistent thickness. Read more about cast vs extruded acrylic.
6 mm (~1/4")opaqueblackacrylic/plexi - caststockedBlack #2025; CAST acrylic provides high-contrast raster engraving and better machinability than EXTRUDED acrylic, but it has less consistent thickness. Read more about cast vs extruded acrylic.
6 mm (~1/4")transparentclearacrylic/plexi - caststockedCAST acrylic provides high-contrast raster engraving and better machinability than EXTRUDED acrylic, but it has less consistent thickness. Read more about cast vs extruded acrylic.
9 mm (~3/8")opaqueblackacrylic/plexi - caststockedBlack #2025 cast acrylic
9 mm (~3/8")transparentclearacrylic/plexi - caststockedClear cast acrylic
12 mm (~1/2")opaqueblackacrylic/plexi - caststockedBlack #2025 cast acrylic
12 mm (~1/2")transparentclearacrylic/plexi - caststockedClear cast acrylic
1.5 mm (~1/16")transparentclearacrylic/plexi - extrudedstockedEXTRUDED acrylic has more consistent thickness than CAST acrylic but is more sensitive to heating and machining, and raster engravings on it are barely visible. Read more about cast vs extruded acrylic.
3 mm (~1/8")opaqueblackacrylic/plexi - extrudedstockedBlack #2025; EXTRUDED acrylic has more consistent thickness than CAST acrylic but is more sensitive to heating and machining, and raster engravings on it are barely visible. Read more about cast vs extruded acrylic.
3 mm (~1/8")transparentclearacrylic/plexi - extrudedstockedEXTRUDED acrylic has more consistent thickness than CAST acrylic but is more sensitive to heating and machining, and raster engravings on it are barely visible. Read more about cast vs extruded acrylic.
4.5 mm (~3/16")opaqueblackacrylic/plexi - extrudedstockedBlack #2025; EXTRUDED acrylic has more consistent thickness than CAST acrylic but is more sensitive to heating and machining, and raster engravings on it are barely visible. Read more about cast vs extruded acrylic.
4.5 mm (~3/16")transparentclearacrylic/plexi - extrudedstockedEXTRUDED acrylic has more consistent thickness than CAST acrylic but is more sensitive to heating and machining, and raster engravings on it are barely visible. Read more about cast vs extruded acrylic.
6 mm (~1/4")opaqueblackacrylic/plexi - extrudedstockedBlack #2025; EXTRUDED acrylic has more consistent thickness than CAST acrylic but is more sensitive to heating and machining, and raster engravings on it are barely visible. Read more about cast vs extruded acrylic.
6 mm (~1/4")transparentclearacrylic/plexi - extrudedstockedEXTRUDED acrylic has more consistent thickness than CAST acrylic but is more sensitive to heating and machining, and raster engravings on it are barely visible. Read more about cast vs extruded acrylic.
0.75 mm (~1/32")transparentclearacrylic/plexiglassstockedImpact-modified clear acrylic, 24" x 48" sheet size.
1.5 mm (~1/16")opaqueblackacrylic/plexiglassstockedBlack #2025
1.5 mm (~1/16")opaqueblack top white coreacrylic/plexiglassstockedThin black top layer, thick white core. 24" x 48" sheet size.
1.5 mm (~1/16")opaquebrushed aluminum top black coreacrylic/plexiglassstockedThin faux brushed-aluminum top layer, thick black core. 24" x 48" sheet size.
1.5 mm (~1/16")translucentwhiteacrylic/plexiglassstockedWhite #7328; allows some light through - great for backlighting applications.
3 mm (~1/8")opaqueblack matteacrylic/plexiglassstockedFront side matte, back side glossy, also known as P95.
3 mm (~1/8")opaqueblack top white coreacrylic/plexiglassstockedThin black top layer, thick white core. 24" x 48" sheet size.
3 mm (~1/8")translucentblueacrylic/plexiglassstockedBlue #2114
3 mm (~1/8")transparentblueacrylic/plexiglassstockedBlue #2424
3 mm (~1/8")translucentbrownacrylic/plexiglassstockedBrown #2418
3 mm (~1/8")opaquebrushed aluminum top black coreacrylic/plexiglassstockedThin faux brushed-aluminum top layer, thick black core. 24" x 48" sheet size.
3 mm (~1/8")translucentclear matteacrylic/plexiglassstockedFront side matte, back side glossy, also known as P95.
3 mm (~1/8")transparentfluorescent blueacrylic/plexiglassstockedEdge-lit, neon/fluorescent light blue #9092.
3 mm (~1/8")transparentfluorescent greenacrylic/plexiglassstockedEdge-lit, neon/fluorescent green #2154.
3 mm (~1/8")transparentfluorescent orangeacrylic/plexiglassstockedEdge-lit, neon/fluorescent orange #2086.
3 mm (~1/8")transparentfluorescent pinkacrylic/plexiglassstockedEdge-lit, neon/fluorescent red #2085.
3 mm (~1/8")opaquegold mirroracrylic/plexiglassstockedMirrored acrylic is only reflective on one side; back side is matte gray and can be engraved, allowing engraving to appear through the acrylic (viewable from the mirrored side).
3 mm (~1/8")transparentgrayacrylic/plexiglassstockedGray #2074
3 mm (~1/8")opaquegrayacrylic/plexiglassstockedGray #3001
3 mm (~1/8")transparentgrayacrylic/plexiglassstockedGray #2064
3 mm (~1/8")translucentgreenacrylic/plexiglassstockedGreen #2108
3 mm (~1/8")transparentgreenacrylic/plexiglassstockedGreen #2092
3 mm (~1/8")translucentivoryacrylic/plexiglassstockedIvory #2146
3 mm (~1/8")transparentlight blueacrylic/plexiglassstockedBlue #2069
3 mm (~1/8")transparentorangeacrylic/plexiglassstockedOrange/amber #2422
3 mm (~1/8")translucentorangeacrylic/plexiglassstockedOrange #2119
3 mm (~1/8")translucentpinkacrylic/plexiglassstockedPink #3199
3 mm (~1/8")translucentredacrylic/plexiglassstockedRed #2157
3 mm (~1/8")transparentredacrylic/plexiglassstockedRed #2423
3 mm (~1/8")opaquesilver mirroracrylic/plexiglassstockedMirrored acrylic is only reflective on one side; back side is matte gray and can be engraved, allowing engraving to appear through the acrylic (viewable from the mirrored side).
3 mm (~1/8")translucentturquoiseacrylic/plexiglassstockedTurquoise #2308
3 mm (~1/8")translucentvioletacrylic/plexiglassstockedViolet #2287
3 mm (~1/8")translucentwhiteacrylic/plexiglassstockedWhite #2447; allows more light through than #7328 white acrylic.
3 mm (~1/8")translucentwhiteacrylic/plexiglassstockedWhite #7328; allows some light through - great for backlighting applications. Also see white #2447, which lets more light through.
3 mm (~1/8")opaquewhiteacrylic/plexiglassstockedWhite #3015
3 mm (~1/8")translucentwhite matteacrylic/plexiglassstockedFront side matte, back side glossy, also known as P95.
3 mm (~1/8")translucentyellowacrylic/plexiglassstockedYellow #2037
3 mm (~1/8")transparentyellowacrylic/plexiglassstockedYellow #2208
4.5 mm (~3/16")translucentwhiteacrylic/plexiglassstockedWhite #7328; allows some light through - great for backlighting applications.
4.5 mm (~3/16")opaquewhiteacrylic/plexiglassstockedWhite #3015
6 mm (~1/4")transparentlight blueacrylic/plexiglassstockedBlue #2069
6 mm (~1/4")opaquewhiteacrylic/plexiglassstockedWhite #3015
6 mm (~1/4")translucentwhiteacrylic/plexiglassstockedWhite #7328; allows some light through - great for backlighting applications.
1/16"opaqueblackDelrin/acetalstockedVery rigid and highly resistant to impact, commonly used for gears. It's smooth surface does not take well to most adhesive applications. Large sheets may have slight warping which can be difficult to flatten.
1/8"opaqueblackDelrin/acetalstockedVery rigid and highly resistant to impact, commonly used for gears. It's smooth surface does not take well to most adhesive applications. Large sheets may have slight warping which can be difficult to flatten.
3/16"opaqueblackDelrin/acetalstockedVery rigid and highly resistant to impact, commonly used for gears. It's smooth surface does not take well to most adhesive applications. Large sheets may have slight warping which can be difficult to flatten.
1/4"opaqueblackDelrin/acetalstockedVery rigid and highly resistant to impact, commonly used for gears. It's smooth surface does not take well to most adhesive applications. Large sheets may have slight warping which can be difficult to flatten.
1/4"opaquenaturalMDFstockedLowest-cost 1/4" material, 24” x 48” sheets, no protective masking (back-side edges and some front-side edges will be discolored depending on the design).
1/2"opaquenaturalMDFstockedLowest-cost 1/2" material, 24” x 48” sheets, no protective masking (back-side edges and some front-side edges will be discolored depending on the design).
0.003"transparentclearmylar/polyesterstockedAlso known as polyester, same material as transparency sheets used with overhead projectors
0.004"transparentclearmylar/polyesterstockedAlso known as polyester, same material as transparency sheets used with overhead projectors
0.005"transparentclearmylar/polyesterstockedAlso known as polyester, same material as transparency sheets used with overhead projectors
0.01"transparentclearmylar/polyesterstockedAlso known as polyester, same material as transparency sheets used with overhead projectors
1.5 mm (~1/16")transparentclearPETGstockedEasily machined with hand tools, bends a lot before it cracks, smells bad so you might have to air the parts out., discolors along laser-cut edges.
3 mm (~1/8")transparentclearPETGstockedEasily machined with hand tools, bends a lot before it cracks, smells bad so you might have to air the parts out., discolors along laser-cut edges.
0.03"opaquenaturalsteel: mildstockedLaser-cut mild steel is NOT guaranteed to be free of burring/blemishes: edges have slight dark discoloration and back of parts might have light burring.
0.06"opaquenaturalsteel: mildstockedLaser-cut mild steel is NOT guaranteed to be free of burring/blemishes: edges have slight dark discoloration and back of parts might have light burring.
0.024"opaquenaturalsteel: stainlessstockedLaser-cut stainless steel is NOT guaranteed to be free of burring/blemishes: edges have slight brown discoloration and back of parts might have light burring.
0.03"opaquenaturalsteel: stainlessstockedLaser-cut stainless steel is NOT guaranteed to be free of burring/blemishes: edges have slight brown discoloration and back of parts might have light burring.
0.036"opaquenaturalsteel: stainlessstockedLaser-cut stainless steel is NOT guaranteed to be free of burring/blemishes: edges have slight brown discoloration and back of parts might have light burring.
0.048"opaquenaturalsteel: stainlessstockedLaser-cut stainless steel is NOT guaranteed to be free of burring/blemishes: edges have slight brown discoloration and back of parts might have light burring.
0.06"opaquenaturalsteel: stainlessstockedLaser-cut stainless steel is NOT guaranteed to be free of burring/blemishes: edges have slight brown discoloration and back of parts might have light burring.
0.03"opaquewhitestyrenestockedNot as glossy as acrylic, easily machined with hand tools; bends a lot before it cracks, parts tend to melt back into scrap so the edges are not clean (look perforated), especially along the bottom and for very small parts.
1.5 mm (~1/16")opaquewhitestyrenestockedNot as glossy as acrylic, easily machined with hand tools; bends a lot before it cracks, parts tend to melt back into scrap so the edges are not clean (look perforated), especially along the bottom and for very small parts
3 mm (~1/8")opaquewhitestyrenestockedSpecial-order, not as glossy as acrylic, easily machined with hand tools; bends a lot before it cracks, parts tend to melt back into scrap so the edges are not clean (look perforated), especially along the bottom and for very small parts
1/16"opaquenaturalwoodstocked1/16" baltic birch plywood.
1/8"opaquenaturalwoodstocked1/8" baltic birch plywood; 30" x 24" and 30" x 48" sheet sizes. Exact thickness tolerance can vary quite a bit.
1/4"opaquenaturalwoodstocked1/4" baltic birch plywood; 30" x 24" and 30" x 48" sheet sizes. Exact thickness tolerance can vary quite a bit.
3/8"opaquenaturalwoodstocked3/8" baltic birch plywood; 30" x 24" and 30" x 48" sheet sizes. Exact thickness tolerance can vary quite a bit.
1/2"opaquenaturalwoodstocked1/2" baltic birch plywood; 30" x 24" and 30" x 48" sheet sizes. Exact thickness tolerance can vary quite a bit.

Select an option above or enter the material type, thickness, and color here:

New Products

QTR-HD-11A Reflectance Sensor Array: 11-Channel, 4mm Pitch, Analog Output
6V, 600mA Step-Down Voltage Regulator D36V6F6
4-25V Adjustable Step-down Voltage Regulator D36V6AHV
QTR-MD-04A Reflectance Sensor Array: 4-Channel, 8mm Pitch, Analog Output
QTR-MD-08RC Reflectance Sensor Array: 8-Channel, 8mm Pitch, RC Output
LPS25HB Pressure/Altitude Sensor Carrier with Voltage Regulator
QTRX-HD-01RC Reflectance Sensor: 1-Channel, 5mm Wide, RC Output, Low Current
QTR-MD-06RC Reflectance Sensor Array: 6-Channel, 8mm Pitch, RC Output
QTRXL-MD-01RC Reflectance Sensor: 1-Channel, 7.5mm Wide, RC Output, Long Range
QTRX-MD-02A Reflectance Sensor Array: 2-Channel, 8mm Pitch, Analog Output, Low Current
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors