|
15V, 2.7A Step-Down Voltage Regulator D30V30F15 |
|
Zumo 2040 Main Board |
|
298:1 Micro Metal Gearmotor LP 6V with 12 CPR Encoder, Back Connector |
|
75:1 Micro Metal Gearmotor HP 6V with 12 CPR Encoder, Back Connector |
|
AltIMU-10 v6 Gyro, Accelerometer, Compass, and Altimeter (LSM6DSO, LIS3MDL, and LPS22DF Carrier) |
|
Motoron M3H550 Triple Motor Controller for Raspberry Pi (Connectors Soldered) |
|
Motoron M2U550 Dual Serial Motor Controller (Header Pins Soldered) |
|
6V, 3.3A Step-Down Voltage Regulator D30V30F6 |
|
ACS724 Current Sensor Carrier 0A to 20A |
|
4.2-15V, 3A Fine-Adjust Step-Down Voltage Regulator D30V30MAS |
Video: Setting the Current Limit on Pololu Stepper Motor Driver Carriers
- 12 February 2016Thank you Claire/Pololu, that was very helpful. I'm more the mechanical type and this provided a clear process for tuning the driver.