Pololu High-Power Motor Driver 18v25

Pololu item #: 758
Brand: Pololu
Status: Special Order Only 
RoHS 3 compliant

This product has been discontinued.

This product has been replaced by an improved second-generation version, which can be used as a near drop-in replacement despite its much smaller size.

This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The little 1.8×0.8-inch board supports a wide 5.5 to 30 V voltage range and is efficient enough to deliver a continuous 25 A without a heat sink.

 Description Specs (10) Pictures (4) Resources (3) FAQs (1) On the blog (0) 

Dimensions

Size: 1.8" x 0.8"
Weight: 4.2 g1

General specifications

Motor channels: 1
Minimum operating voltage: 5.5 V
Maximum operating voltage: 30 V
Continuous output current per channel: 25 A2
Maximum PWM frequency: 40 kHz3
Maximum logic voltage: 5.5 V
MOSFET on-resistance (max per leg): 1.8 mΩ
Reverse voltage protection?: N

Notes:

1
Without any connectors or through-hole capacitors.
2
Typical results with 100% duty cycle at room temperature.
3
Higher frequencies are possible, but duty cycle will be limited by dead time of approximately 3 μs per cycle.

Related Products

Pololu G2 High-Power Motor Driver 18v25
Pololu G2 High-Power Motor Driver 18v17
Pololu G2 High-Power Motor Driver 24v21
Pololu Simple High-Power Motor Controller 18v25
Pololu Simple High-Power Motor Controller 18v15 (Fully Assembled)
Pololu Simple High-Power Motor Controller 18v15
Pololu High-Power Motor Driver 18v25 CS
Pololu High-Power Motor Driver 24v20
Pololu High-Power Motor Driver 36v15
VNH5019 Motor Driver Carrier
Pololu Dual VNH5019 Motor Driver Shield for Arduino

Related Categories

Pololu Simple Motor Controllers
Brushed DC Motor Drivers
Brushed DC Motor Controllers
Motors and Gearboxes
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors