ACS711EX Current Sensor Carrier -31A to +31A

Pololu item #: 2453
Brand: Pololu
Status: Active and Preferred 
RoHS 3 compliant

Price break Unit price (US$)
1 3.95
5 3.63
25 3.34
100 3.08


backorders allowed

This board is a simple carrier of Allegro’s ±31 A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~0.6 mΩ) current path and electrical isolation up to 100 V. This version accepts a bidirectional current input with a magnitude up to 31 A and outputs a proportional analog voltage centered at Vcc/2 with a typical error of ±4%. It operates from 3 V to 5.5 V, so it can interface directly to both 3.3 V and 5 V systems.

 Description Specs (9) Pictures (6) Resources (4) FAQs (0) On the blog (0) 

File downloads

Related Products

ACS711EX Current Sensor Carrier -15.5A to +15.5A
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Right Angle
0.100" (2.54 mm) Female Header: 1x5-Pin, Straight
0.1" (2.54mm) Crimp Connector Housing: 1x5-Pin 10-Pack
Screw Terminal Block: 2-Pin, 5 mm Pitch, Side Entry (4-Pack)
Screw Terminal Block: 2-Pin, 3.5 mm Pitch, Side Entry (4-Pack)
T Connector Male-Female Pair

Related Categories

Current Sensors
ACS724 Current Sensor Carriers
ACHS-712x Current Sensor Carriers
Terminal Blocks
Premium Jumper Wires
Wires with Pre-Crimped Terminals
0.1″ (2.54 mm) Male Headers
Electronics Prototyping
Motion Control Modules
Motors and Gearboxes
RC Servos
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors