19:1 Metal Gearmotor 37Dx52L mm 12V with 64 CPR Encoder (No End Cap)

Pololu item #: 1442
Brand: Pololu
Status: Obsolete 

This product has been discontinued.

This gearmotor has been replaced by a functionally identical version with a protective end cap over the encoder.

Note: This gearmotor has been replaced by a functionally identical version with a protective end cap over the encoder.

This gearmotor is a powerful 12V brushed DC motor with a 18.75:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 1200 counts per revolution of the gearbox’s output shaft. These units have a 0.61"-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder.

Key specs at 12 V: 500 RPM and 300 mA free-run, 84 oz-in (5 kg-cm) and 5 A stall.

Alternatives available with variations in these parameter(s): gear ratio Select variant…

 Description Specs (13) Pictures (8) Resources (1) FAQs (2) On the blog (0) 

37D mm metal gearmotor.

37D mm metal gearmotor with 64 CPR encoder (no end cap).

37D mm metal gearmotor with 64 CPR encoder (no end cap) and Pololu 90×10mm wheel.

37D mm gearmotor (without encoder) with L-bracket and 6mm universal mounting hub.

37D mm Metal Gearmotor next to a Micro Metal Gearmotor for size comparison.

37D mm gearmotor (without encoder) with L-bracket and 6mm universal mounting hub.

37D mm metal gearmotor dimensions (units in mm).

Encoder A and B outputs for 37D mm metal gearmotor with 64 CPR encoder (12V motor running at 12 V).


Related Products

19:1 Metal Gearmotor 37Dx68L mm 12V with 64 CPR Encoder (Spur Pinion)
30:1 Metal Gearmotor 37Dx68L mm 12V with 64 CPR Encoder (Spur Pinion)
50:1 Metal Gearmotor 37Dx70L mm 12V with 64 CPR Encoder (Spur Pinion)
70:1 Metal Gearmotor 37Dx70L mm 12V with 64 CPR Encoder (Spur Pinion)
100:1 Metal Gearmotor 37Dx73L mm 12V with 64 CPR Encoder (Spur Pinion)
131:1 Metal Gearmotor 37Dx73L mm 12V with 64 CPR Encoder (Spur Pinion)
Pololu Machined Aluminum Bracket for 37D mm Metal Gearmotors
Pololu Stamped Aluminum L-Bracket Pair for 37D mm Metal Gearmotors
Pololu Universal Aluminum Mounting Hub for 6mm Shaft, #4-40 Holes (2-Pack)
Pololu Universal Aluminum Mounting Hub for 6mm Shaft, M3 Holes (2-Pack)
Pololu Aluminum Scooter Wheel Adapter for 6mm Shaft
Pololu Wheel 80×10mm Pair - Black
Pololu Simple High-Power Motor Controller 18v15 (Fully Assembled)
Pololu Wheel 90×10mm Pair - White
Pololu Qik 2s15v9 Dual Serial Motor Controller
VNH5019 Motor Driver Carrier
Pololu Dual VNH5019 Motor Driver Shield for Arduino
Female Crimp Pins for 0.1" Housings 100-Pack
Male Crimp Pins for 0.1" Housings 100-Pack
Orangutan SVP-1284 Robot Controller (assembled)
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black

Related Categories

37D Metal Gearmotors
Pololu Wheels and Tracks
Brushed DC Motor Controllers
Brushed DC Motor Drivers
Robot Controllers
Current Sensors
25D Metal Gearmotors
Micro Metal Gearmotors
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Crimp Connector Housings
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors