ACS715 Current Sensor Carrier 0 to 30A

Pololu item #: 1186
Brand: Pololu
Status: Discontinued 

This product has been discontinued.

Please consider the ACS724 Current Sensor Carrier 0A to 30A as an alternative.

This board is a simple carrier of Allegro’s 30A ACS715 Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.1 kV RMS. This version accepts a unidirectional current input up to 30 A and outputs a proportional analog voltage (133 mV/A) that measures 500 mV when the input current is zero. The typical output error is ±1.5%. It operates from 4.5 V to 5.5 V and is intended for use in 5 V systems.

 Description Specs (6) Pictures (2) Resources (2) FAQs (0) On the blog (1) 

No FAQs available.

Related Products

ACS724 Current Sensor Carrier 0A to 30A
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Right Angle
T Connector Male-Female Pair
Screwless Terminal Block: 2-Pin, 0.1″ Pitch, Side Entry (3-Pack)
Premium Jumper Wire 50-Piece 10-Color Assortment F-F 6"

Related Categories

ACS724 Current Sensor Carriers
Current Sensors
Terminal Blocks
Premium Jumper Wires
Electronics Prototyping
Sensors
Motion Control Modules
Motors and Gearboxes
RC Servos
Pololu High-Power Motor Drivers
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors