Inventory Reduction Sale

Products in category “Inventory Reduction Sale”

On sale!
Pololu item #: 2154
Price: $36.95 $44.95
Quantity:

The mbed NXP LPC11U24 is an easy-to-use MCU development board designed for rapid prototyping. At its heart is a low-power 32-bit ARM Cortex-M0 processor running at 48 MHz with 32 KB flash and 8 KB RAM, which makes it more capable than popular, similarly-priced 8-bit prototyping alternatives. A comprehensive firmware library and plenty of sample code help you get your program up and running quickly, and a free online IDE and C++ compiler means that no software installation is required. Downloading programs is as simple as using a USB flash drive (no external programmer is necessary).

On sale!
Pololu item #: 2752
Price: $33.95 $39.95
Quantity:

The Raspberry Pi is a credit card-sized computer with an ARM processor that can run Linux. This item is the Raspberry Pi Model B+, which has 512 MB of RAM, an Ethernet port, HDMI output, audio output, RCA composite video output (through the 3.5 mm jack), four USB ports, and 0.1″-spaced pins that provide access to general purpose inputs and outputs (GPIO). The Raspberry Pi requires a microSD card with an operating system on it (not included). The Raspberry Pi is very popular, with lots of example projects and information available online.

On sale!
Pololu item #: 2472
Price: $66.95 $73.95
Quantity:

The Arduino Yun has the same footprint as an Arduino Uno but combines an ATmega32U4 microcontroller (the same as the Leonardo) and a Linux system based on the Atheros AR9331 chipset. Additionally, there are built-in Ethernet and WiFi capabilities, enabling it to communicate with networks out of the box. The combination of the classic Arduino programming experience and advanced internet capabilities afforded by a Linux system make the Yún a powerful tool for communicating with the internet of things.

On sale!
Pololu item #: 2473
Price: $225.00 $274.95
Quantity:

The Arduino Robot is the first official Arduino on wheels. The robot chassis is comprised of two serially connected platforms, each of which features an ATmega32U4 and acts as an independent Arduino board. The upper platform, called the Control Board, includes a five-button keypad, knob potentiometer, color LCD, SD card reader (with SD card), speaker, and digital compass. The lower platform, or Motor Board, controls the two integrated DC motors and includes five reflectance sensors that can be used for line following or edge detection. The robot ships fully assembled and includes a USB cable, rechargable batteries, and a wall adapter for charging.

On sale!
Pololu item #: 1699
Price: $44.95 $58.95
Quantity:

The Arduino Mega 2560 R3, the successor to the Arduino Mega, is a microcontroller board based on a ATmega2560 AVR microcontroller. It has 70 digital input/output pins (of which 15 can be used as PWM outputs and 16 can be used as analog inputs), a 16 MHz resonator, a USB connection, a power jack, an in-circuit system programming (ICSP) header, and a reset button. The Arduino has an extensive support community, which makes it a very easy way to get started working with embedded electronics.

On sale!
Pololu item #: 2464
Price: $5.95 $9.95
Quantity:

The GP2Y0A41SK0F Sharp analog distance sensor features a detection range of 1.5″ to 12″ (4 cm to 30 cm). The shorter range gives you higher resolution measurements, and the lower minimum detection distance makes this sensor great for detecting very close objects. The distance is indicated by an analog voltage, making this sensor very easy to use.

On sale!
Pololu item #: 136
Price: $6.95 $9.95
Quantity:

The GP2Y0A21 Sharp distance sensor is a great way to add obstacle avoidance or motion sensing to your robot or any other project. With a detection range of 4″ to 32″ (10 cm to 80 cm) and an analog voltage indicating the distance, this sensor is very easy to use.

On sale!
Pololu item #: 1137
Price: $8.95 $13.95
Quantity:

The GP2Y0A02 is the longest-range optical distance sensor we carry, featuring a detection range of 8″ to 60″ (20 cm to 150 cm). The high maximum detection distance makes this sensor a viable alternative to sonar in some applications. The distance is indicated by an analog voltage, making this sensor very easy to use.

On sale!
Pololu item #: 2474
Price: $9.95 $11.95
Quantity:

The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10 cm to 150 cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module. The sensor ships installed on our compact carrier board, which makes it easy to integrate this great sensor into your project, and is configured for 5V mode.

On sale!
Pololu item #: 2476
Price: $9.95 $11.95
Quantity:

The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10 cm to 150 cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module. The sensor ships installed on our compact carrier board, which makes it easy to integrate this great sensor into your project, and is configured for 3V mode.

On sale!
Pololu item #: 2465
Price: $6.95 $8.95
Quantity:

This small digital distance sensor detects objects between 0.5 cm and 15 cm (0.2″ and 6″) away. With its quick response time, small size, low current draw, and short minimum sensing distance, this sensor is a good choice for non-contact, close-proximity object detection, and our compact carrier PCB makes it easy to integrate into your project.

On sale!
Pololu item #: 2740
Price: $99.95 $129.95
Quantity:

The UM7-LT orientation sensor from CH Robotics is an Attitude and Heading Reference System (AHRS) that contains a three-axis accelerometer, rate gyro, and magnetometer. It combines this data using an Extended Kalman Filter to produce attitude and heading estimates.

On sale!
Pololu item #: 2469
Price: $19.95 $27.95
Quantity:

The Pololu AltIMU-10 v3 is an inertial measurement unit (IMU) and altimeter that features the same L3GD20H gyro and LSM303D accelerometer and magnetometer as the MinIMU-9 v3, and adds an LPS331AP digital barometer. An I²C interface accesses ten independent pressure, rotation, acceleration, and magnetic measurements that can be used to calculate the sensor’s altitude and absolute orientation. The board operates from 2.5 to 5.5 V and has a 0.1″ pin spacing.

Clearance: This board is being replaced by the newer AltIMU-10 v4.

On sale!
Pololu item #: 2126
Price: $4.95 $7.95
Quantity:

This carrier for ST’s LPS331AP digital barometer measures pressures from 260 mbar to 1260 mbar (26 kPa to 126 kPa) with absolute pressure accuracy over temperature down to ±2 mbar (0.2 kPa) and typical RMS noise of 0.02 mbar (0.002 kPa) in high-resolution mode. These pressures can easily be converted to altitudes. The board has a 3.3 V linear regulator and integrated level shifters that allow it to work over an input voltage range of 2.5 V to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards. The sensor offers I²C and SPI interfaces.

On sale!
Pololu item #: 2125
Price: $6.95 $19.95
Quantity:

This sensor is a carrier/breakout board for the ST L3GD20 three-axis gyroscope, which measures the angular rates of rotation about the roll (X), pitch (Y), and yaw (Z) axes. Angular velocity measurements with a configurable range of ±250°/s, ±500°/s, or ±2000°/s can be read through a digital I²C or SPI interface. The board has a 3.3 V linear regulator and integrated level-shifters that allow it to work over an input voltage range of 2.5–5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards.

Clearance: This board is being replaced by the newer L3GD20H carrier.

On sale!
Pololu item #: 1273
Price: $4.49 $17.95
Quantity:

The LSM303DLM combines a digital 3-axis accelerometer and 3-axis magnetometer into a single package that is ideal for making a tilt-compensated compass. The six independent readings, whose sensitivities can be set in the ranges of ±2 to ±8 g and ±1.3 to ±8.1 gauss, are available through an I²C interface. The carrier board operates from 2.6 to 5.5 V and has a 0.1″ pin spacing.

Clearance: This board is being replaced by the newer LSM303DLHC carrier (which is pin-compatible) and LSM303D carrier.

On sale!
Pololu item #: 2729
Price: $8.95 $11.95
Quantity:

This force-sensing linear potentiometer (FSLP) from Interlink Electronics is a passive component with resistances that depend on the magnitude and location of the force applied at some point along the 1.4″ (3.6 cm) active length of the strip, making it easy to add novel touch interfaces or tactile sensors to your project. An external resistor (typically 4.7 kΩ to 10 kΩ) is required but not included.

On sale!
Pololu item #: 1645
Price: $5.75 $7.95
Quantity:

This force-sensing resistor (FSR) from Interlink Electronics is a passive component that exhibits a decrease in resistance when there is an increase in the force applied to the 1.5″ × 1.5″ (4 cm × 4 cm) active area, allowing you to create a sensor that is able to detect force or pressure. With a force sensitivity range of a few grams to a few kilograms, this sensor is optimized for use in human touch control applications.

On sale!
Pololu item #: 2728
Price: $4.95 $6.95
Quantity:

This force-sensing resistor (FSR) from Interlink Electronics is a passive component that exhibits a decrease in resistance when there is an increase in the force applied to the 0.58″-diameter (1.5 cm) active area, allowing you to create a sensor that is able to detect force or pressure. With a force sensitivity range of a few grams to a few kilograms, this sensor is optimized for use in human touch control applications.

On sale!
Pololu item #: 1695
Price: $4.25 $5.95
Quantity:

This force-sensing resistor (FSR) from Interlink Electronics is a passive component that exhibits a decrease in resistance when there is an increase in the force applied to the 0.2″-diameter (0.5 cm) active area, allowing you to create a sensor that is able to detect force or pressure. With a force sensitivity range of a few grams to a few kilograms, this sensor is optimized for use in human touch control applications.

On sale!
Pololu item #: 1461
Price: $7.45 $9.95
Quantity:

This UL-listed 15 W, “wall wart”-style switching power adapter supplies up to 3 A at a regulated 5 VDC. The AC adapter works with input voltages of 100 – 240 VAC and has a 1.5 m (5 ft) DC power cord that is terminated by a center-positive, 5.5 × 2.1 mm barrel connector.

On sale!
Pololu item #: 1462
Price: $13.45 $16.95
Quantity:

This UL-listed 25 W desktop-style switching power adapter supplies up to 5 A at a regulated 5 VDC from input voltages of 100 – 240 VAC. It includes a 1.5 m (5 ft) AC power cord terminated by a three-prong, US-style plug and has a 1.5 m (5 ft) DC power cord that is terminated by a center-positive, 5.5 × 2.1 mm barrel connector.

On sale!
Pololu item #: 1463
Price: $4.45 $5.95
Quantity:

This UL-listed 9 W, “wall wart”-style switching power adapter supplies up to 1 A at a regulated 9 VDC. The AC adapter works with input voltages of 100 – 240 VAC and has a 1.5 m (5 ft) DC power cord that is terminated by a center-positive, 5.5 × 2.1 mm barrel connector.

On sale!
Pololu item #: 1464
Price: $7.45 $9.95
Quantity:

This UL-listed 27 W, “wall wart”-style switching power adapter supplies up to 3 A at a regulated 9 VDC. The AC adapter works with input voltages of 100 – 240 VAC and has a 1.5 m (5 ft) DC power cord that is terminated by a center-positive, 5.5 × 2.1 mm barrel connector.

On sale!
Pololu item #: 1465
Price: $13.45 $17.95
Quantity:

This UL-listed 45 W desktop-style switching power adapter supplies up to 5 A at a regulated 9 VDC from input voltages of 100 – 240 VAC. It includes a 1.5 m (5 ft) AC power cord terminated by a three-prong, US-style plug and has a 1.5 m (5 ft) DC power cord that is terminated by a center-positive, 5.5 × 2.1 mm barrel connector.

On sale!
Pololu item #: 2268
Price: $32.95 $49.95
Quantity:

This NEMA 17-size hybrid bipolar stepping motor has an integrated 28 cm (11″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The included traveling nut has four mounting holes and moves 40 µm (1.6 mil) per full step; finer resolution can be achieved with microstepping. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).

On sale!
Pololu item #: 1200
Price: $13.95 $19.95
Quantity:

This NEMA 17-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1.2 A at 4 V, allowing for a holding torque of 3.2 kg-cm (44 oz-in).

On sale!
Pololu item #: 1205
Price: $11.95 $15.95
Quantity:

This NEMA 11-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 670 mA at 3.5 V, allowing for a holding torque of 600 g-cm (8.3 oz-in).

On sale!
Pololu item #: 1248
Price: $8.95 $12.95
Quantity:

The SM-S4303R is a standard-sized servo that has been built by SpringRC specifically for continuous rotation, making it an easy way to get your robot moving. It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer. This is the most popular continuous rotation servo we carry.

Key specs at 6 V: 54 RPM (no-load), 71 oz-in (5.1 kg-cm), 41 g

On sale!
Pololu item #: 2146
Price: $34.95 $49.95
Quantity:

The 8312TG is a premium standard-size servo from Power HD that offers a great combination of torque and speed. It has a coreless motor with an all-metal (titanium-shielded aluminum) gear train, digital control electronics, and two ball bearings on the output shaft. Servo horns and associated hardware are included.

Key specs at 6 V: 0.10 sec/60°, 190 oz-in (13.5 kg-cm), 57 g.