Electronics » Sensors » Sonar Range Finders »
Maxbotix LV-MaxSonar-EZ3 Sonar Range Finder MB1030
 
|
||||||||||||||||||
|
||||||||||||||||||
This compact sonar range finder by Maxbotix detects objects from 0 to 6.45 m (21.2 ft) with a resolution of 2.5 cm (1") for distances beyond 15 cm (6"). Unlike other sonar range finders, the LV-MaxSonar has virtually no dead zone: it can detect even small objects up to and touching the front sensor face!
The EZ0, EZ1, EZ2, EZ3, and EZ4 versions have progressively narrower beam angles.
Compare all products in Sonar Range Finders.
| Description | Specifications (10) | Pictures (7) | Resources (10) | FAQs (0) |
|---|
File downloads
- LV-MaxSonar-EZ beam width comparison (224k pdf)
Recommended links
- Maxbotix sonar range finder selection guide
- Report on Maxbotix sonar range finder tests
- This report explains testing procedures, calculations, and conclusions for Maxbotix’s reliability demonstration test and mean time between failure (MTBF) test. Testing demonstrated over 200,000 hours for a MTBF with a 90% confidence level.
- LV-MaxSonar-EZ0 (MB1000) datasheet
- LV-MaxSonar-EZ1 (MB1010) datasheet
- Note: Certain elements in this datasheet only apply to newer revisions of the EZ1 that are marked on the back of the board with a brown dot. If your sensor does not have a brown dot on the back, these sections of the datasheet do not apply.
- LV-MaxSonar-EZ2 (MB1020) datasheet
- LV-MaxSonar-EZ3 (MB1030) datasheet
- LV-MaxSonar-EZ4 (MB1040) datasheet
- FAQ and code examples from MaxBotix
- Sonar Acoustic Ranger
- A PC application for reading the MaxSonar serial protocol.
Home | Forum | Resources | Wish Lists | Distributors | Ordering Information | BIG Order Form | About | Contact
© 2001–2013 Pololu Corporation
