Electronics » Computer Interface »
Orangutan USB programmer
 
|
This compact programmer can program the Orangutan, Orangutan LV-168, and Baby Orangutan robot controllers, as well as the 3pi robot, through a USB connection. The on-board USB-to-serial adapter allows the unit to look like a serial AVRISP programmer to your programming software. The serial port TX and RX lines are connected to separate pads so that the programmer can also be used as a USB-to-serial adapter.
Compare all products in Computer Interface or Pololu Products That Use the CP2102.
| Description | Specifications (0) | Pictures (3) | Resources (13) | FAQs (1) |
|---|
- Can I make my Orangutan USB Programmer faster?
- Yes, the Orangutan USB programmer ships with a low default programming speed so that it can be used to program AVRs that have clock speeds as low as 1 MHz. If you have a Baby Orangutan or Orangutan LV-168 that is running at 20 MHz, you can safely set the programmer to its highest ISP clock frequency. If you have a regular Orangutan running at 8 MHz, you can safely set the programmer to its second-highest ISP clock frequency. In general, the programmer’s ISP clock frequency must be less than 1/4th your target AVR’s clock frequency. In older versions of AVR Studio, you can set the programmer’s ISP frequency under the “Board” tab of the AVRISP programming dialog. In more recent versions of AVR Studio, this option has moved to the “Main” tab of the AVRISP programmind dialog. Please see section 5.b of the Orangutan USB programmer’s users’s guide.
Home | Contact | About | Forum | Resources | Distributors | Ordering information
© 2001–2008 Pololu Corporation
