This tiny breakout board for TI’s DRV8835 dual motor driver can deliver 1.2 A per channel continuously (1.5 A peak) to a pair of DC motors, and it supports two possible control interfaces for added flexibility of use: IN/IN and PHASE/ENABLE. With an operating voltage range from 2 to 11 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering up to two small, low-voltage motors. The carrier board has the form factor of a 14-pin DIP package, which makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
Compare all products in Brushed DC Motor Drivers.
Dimensions
|
Size:
|
0.4″ × 0.7″1
|
|
Weight:
|
0.5 g1
|
General specifications
|
Motor driver:
|
DRV8835
|
|
Motor channels:
|
2
|
|
Minimum operating voltage:
|
2.0 V
|
|
Maximum operating voltage:
|
11 V
|
|
Continuous output current per channel:
|
1.2 A2
|
|
Peak output current per channel:
|
1.5 A
|
|
Continuous paralleled output current:
|
2.4 A2
|
|
Reverse voltage protection?:
|
Y
|
Notes:
- 1
- Without included hardware.
- 2
- Typical results with 100% duty cycle at room temperature.
