Electronics » Motion Control Modules » Stepper Motor Drivers »
DRV8824 Stepper Motor Driver Carrier, Low Current
 
|
||||||||||||||||||||
|
||||||||||||||||||||
The DRV8824 stepper motor driver carrier is a breakout board for TI’s DRV8824 microstepping bipolar stepper motor driver, a lower-current version of the DRV8825. The DRV8824 carrier can only deliver up to 0.75 A per coil without a heat sink (it is rated for up to 1.2 A per coil with sufficient additional cooling), but it has larger current-sense resistors that allow for improved microstepping performance at low currents. This carrier has the same pinout, interface, and features as our DRV8825 carrier, which means it can serve as a direct substitute for the DRV8825 carrier when using lower-current stepper motors.
Compare all products in Stepper Motor Drivers.
| Description | Specifications (10) | Pictures (8) | Resources (2) | FAQs (3) |
|---|
|
|
DRV8824 stepper motor driver carrier. |
|---|
|
|
DRV8824 stepper motor driver carrier with included hardware. |
|---|
|
|
DRV8824/DRV8825 stepper motor driver carriers with included header pins soldered. |
|---|
|
|
DRV8824/DRV8825 stepper motor driver carrier with dimensions. |
|---|
|
|
Minimal wiring diagram for connecting a microcontroller to a DRV8824/DRV8825 stepper motor driver carrier (full-step mode). |
|---|
|
|
Alternative minimal wiring diagram for connecting a microcontroller to a DRV8824/DRV8825 stepper motor driver carrier (full-step mode). |
|---|
|
|
Schematic diagram for the DRV8824/DRV8825 stepper motor driver carrier. |
|---|
|
|
Schematic of nSLEEP and nFAULT pins on DRV8824/DRV8825/DRV8834 carriers. |
|---|
Home | Forum | Resources | Wish Lists | Distributors | Ordering Information | BIG Order Form | About | Contact
© 2001–2013 Pololu Corporation
