This tiny board converts hobby radio control pulses to digital on/off signals for use in RC switch and simple RC adapter applications. One output indicates the presence of a valid RC signal (10-100 Hz pulse rate, 0.5-2.5 ms pulse width), and the other output indicates whether the pulse width is above or below the 1.6 ms threshold (with ±0.1 ms hysteresis). An integrated small, low-side MOSFET can be used to drive small loads (up to around 3 A), such as a relay, when the switch is on.
Compare all products in RC Interface or Switches, Buttons, and Relays.
Dimensions
|
Size:
|
0.4 x 0.6"
|
|
Weight:
|
0.5 g1
|
General specifications
|
Maximum operating voltage:
|
30 V2
|
|
Maximum output current:
|
3 A
|
|
Minimum logic voltage:
|
2 V
|
|
Maximum logic voltage:
|
5.5 V3
|
Notes:
- 1
- Without included hardware.
- 2
- Maximum MOSFET voltage; the flyback diode is only rated for 20 V.
- 3
- RC IN pin can tolerate a maximum of 7 V and has a minimum high threshold of 1 V.
